112 fully automatic brand new egg incubator with digital controls and LED display

Operation panel description:
Setting key:
1. Factory default: temperature 37.8, humidity 60. (Note: the machine factory has set the hatch required the best humidity, do not recommend changing their own value), press the “set” button, set the indicator light, then enter Set the mode
2. Change the reference temperature: Click the “set” key, then press the “+” key or “-” key to adjust to the desired temperature value, then press the “set” key to save
3. Change the reference temperature: double-click the “set” key, then press the “+” key or “-” key to adjust to the desired temperature value, then click the “set” key to saveWork signal light
The indicator light is on: the heating tube is working
Indicator flashes: temperature close to the reference temperature near (this phenomenon is normal)

Display screen
The temperature display is below the reference temperature ± 1 degree alarm
The humidity display is less than 45 but greater than 80 alarms

Days show
24 hours after the power is automatically added 1, after the power is not accumulated

Turn the countdown
2 hours of the countdown table, showing 00:00 when the automatic turn eggs

Common parameters:
RST key: The button of turning the egg manually
“-” : The button of canceling alarm.
Restore factory settings: press “+” and “-” for more than 5 seconds